PEER has published Report No. 2023/01: "Models for the Cyclic Resistance of Silts and Evaluation of Cyclic Failure during Subduction Zone Earthquakes." It was authored by Armin W. Stuedlein, Ali Dadashiserej, and Amalesh Jana, School of Civil and Construction Engineering Oregon State University, Corvallis, Oregon.
Access the report and 2 page summary. Access the full listing of PEER reports.
Abstract
This report describes several advances in the cyclic failure assessment of silt soils with immediate and practical benefit to the geotechnical earthquake engineering profession. First, a database of cyclic loading test data is assembled, evaluated, and used to assess trends in the curvature of the CRR-N (cyclic resistance ratio - the number of equivalent cycles) relationship. This effort culminated in a plasticity index-dependent function which can be used to estimate the exponent b in the power law describing cyclic resistance, and may be used to estimate the cyclic resistance of silt soils as well as the number of equivalent loading cycles anticipated for subduction zone earthquakes. Statistical models for the cyclic resistance ratio and cyclic strength ratio are presented in this report. The SHANSEP (Stress History and Normalized Soil Engineering Properties) - inspired functional form of these models have been trained and tested against independent datasets and finalized using a combined dataset to provide reasonable estimates of resistance based on the available data. These models can be used to provide provisional estimates of the CRR-N and cyclic strength ratio power laws for cyclic shear strain failure criteria ranging from 1 to 10%, within certain stated limitations.
The ground motion records within the NGA Subduction Project which have been released to the public to-date are implemented to examine the role of subduction zone earthquake characteristics on the number of equivalent loading cycles for a wide range of soils with exponents b ranging from 0.05 (moderate plasticity silt and clay) to 0.35 (dense sand). This analysis shows that the number of loading cycles for a given magnitude subduction zone earthquake is larger than those previously computed, whereas the corresponding magnitude scaling factors for use with the Simplified Method span a smaller range as a result of the ground motion characteristics. Owing to the large variability in the computed equivalent number of loading cycles, consideration of the uncertainty is emphasized in forward analyses.
The work described herein may be used to estimate cyclic resistance of intact non-plastic and plastic silt soils and corresponding factor of safety against cyclic failure for a range in cyclic shear strain failure criteria, to plan cyclic laboratory testing programs, and to calibrate models for use in site response and nonlinear deformation analyses in the absence of site-specific cyclic test data. As with any empirical approach, the models presented herein should be revised when additional, high-quality cyclic testing data become available.
Keywords: silts, cyclic failure, cyclic softening, liquefaction, cyclic resistance, subduction zone earthquakes